United Kingdom
20years
accepted cards
Technomate TM5400 motorised satellite receivers and systems, 2 CAM slots, embedded multi CAM. TM5400 with motorised dishes from 80cm to 1.8m. 85cm transparent motorised dish options including the Technomate TM2300 and 2600 motors and Technomate 0.1dB LNBs. Exceptional value for money. The Satellite Superstore are authorised Technomate distributers.
We have 2 identical sites on different servers. www.satellitesuperstore.com & www.satellitesuperstore.co.uk If one site is down, please use the other one
Links
Satellite Museum
Shipping info
FAQs
Advice
Support
  Contact Us
  Wall outlet plates
        Accessories  
  Installation equipment  
  Cable
  Wall mounts & ground stands  
  Satellite finder meters  
Sky receivers
Cryptobox
Technomate
    VU+
  Humax    
  IPTV    
  Technisat
  Edision
  French TV
  Italian TV
  All receivers
Cams
  Adult cards
TV, FM and DAB Aerials
Freesat receivers
Twin tuner PVRs
  Linux receivers
Motorised systems
Systems
Fixed Dishes
Motorised dishes  
SuperJack Actuators  
2,3 or 4 satellites on 1 fixed dish
  LNBs
 Feedhorns
 Motors
 V box
  Fibre
Caravan products
CCTV
 All products
C Band
 DISEqC
  Multiswitches

As a family based company we offer telephone sales and advice. Tel. 01207 544664

Technomate TM5402 Mk4
High Definition receiver.


Technomate TM5402

Please note that we are official distributors for Technomate. Note. We only sell UK models. We do not sell "grey imports"
HD receiver with BLIND SEARCH receiver.
All receivers sent out are packed in an outer box to protect the manufacturers box. We like receivers to arrive at
the customer in perfect condition.

Technomate TM5402 Mk4 HD.
Click here to order.



Spare handsets are available for most receivers
that we sell. Usually £29.95 including shipping.




Buying a fully loaded (programmed)
satellite receiver for motorised use.


This service is available for any motorised dish. If you are buying a system, or just a receiver
and you already have a motorised dish, we can take the receiver out of its box and fully program
it on one of our demonstration dishes. This would mean that the new programmed receiver can be
connected up by the customer and all the satellites channels will work straight away.
(Providing it is connected to a dish that is properly fitted, set up, and tracking the arc)
It would take a customer about many hours to program a receiver (since there would be
unfamiliarity with the installation menu system). After programming, the channels are then organised
in a logical order. (This is what takes the most time.) We make sure the first channel on every
satellite is a clear free to air unscrambled channel. Channels are organised into a logical order.
e.g. Adult channels all together etc. Movie packages .. etc. Moving all of the channels into a
logical order can take days. This programming is ONLY £19.95 This service is entirely optional
but for mail order customers it can take a great deal of the worry and uncertainty out of a
purchase. The programmed receiver is supplied without dish positions to be used with any dish.
Only the positions and the limits need to be added. This is a 10 minute job. This option is
ideal if you are buying a full motorised system and you intend to fit it yourself.
This option helps a great deal. It also makes it easier to install a motorised dish as channels
already loaded can help identify the satellite if a budget satellite meter is being used. Detailed
installation notes written by us are included and we can talk you through the installation
over the phone if required. See our support package on our support page.
Our notes guide you through how to connect a programmed receiver, and setting the positions.
In addition, useful easy to follow notes on blind searching written by us are included for
future reference. For international orders, this option has one other worthwhile purpose.
The receiver is fully tested before shipping while it is being programmed.
Motorised receiver full programming option
Order code MOTPROG
Add only £19.95



SLX Omni Link Kit +.
Wired control for all receivers.


Omni link kit.

Just like the TV eye link system used for Sky Digiboxes, this system works with all receivers.
It all works with the existing UHF distribution system in your home.
Control up to three devices. One remote link eye includes for one remote room. Extra
SLX link eyes for more rooms are abailable below.
Connect up the link to the satellite receiver and the TV link at the end of the cable in the remote
room and have full contol of the satellite receiver from that room. See it on our accessories page.

XRAY radio remote extender.
Wireless control for all receivers.


XRAY radio remote extender. XRAY radio remote extender..

This is a wireless system of extending the remote control to other rooms.
It is not infra red - it uses radio frequencies that will pass through walls and
have a long range. Simply walk into any room with your handset (or extra handset)
and you can control your satellite receiver wherever it is in the house.
See it on our accessories page.



Buying a fully loaded (programmed)
satellite receiver for motorised use.


This service is available for any motorised dish. If you are buying a system, or just a receiver
and you already have a motorised dish, we can take the receiver out of its box and fully program
it on one of our demonstration dishes. This would mean that the new programmed receiver can be
connected up by the customer and all the satellites channels will work straight away.
(Providing it is connected to a dish that is properly fitted, set up, and tracking the arc)
It would take a customer about many hours to program a receiver (since there would be
unfamiliarity with the installation menu system). After programming, the channels are then organised
in a logical order. (This is what takes the most time.) We make sure the first channel on every
satellite is a clear free to air unscrambled channel. Channels are organised into a logical order.
e.g. Adult channels all together etc. Movie packages .. etc. Moving all of the channels into a
logical order can take days. This programming is ONLY £19.95 This service is entirely optional
but for mail order customers it can take a great deal of the worry and uncertainty out of a
purchase. The programmed receiver is supplied without dish positions to be used with any dish.
Only the positions and the limits need to be added. This is a 10 minute job. This option is
ideal if you are buying a full motorised system and you intend to fit it yourself.
This option helps a great deal. It also makes it easier to install a motorised dish as channels
already loaded can help identify the satellite if a budget satellite meter is being used. Detailed
installation notes written by us are included and we can talk you through the installation
over the phone if required. See our support package on our support page.
Our notes guide you through how to connect a programmed receiver, and setting the positions.
In addition, useful easy to follow notes on blind searching written by us are included for
future reference. For international orders, this option has one other worthwhile purpose.
The receiver is fully tested before shipping while it is being programmed.
Motorised receiver full programming option
Order code MOTPROG
Add only £19.95


Buying a fully loaded (programmed)
satellite receiver for motorised use.


This service is available for any motorised dish. If you are buying a system, or just a receiver
and you already have a motorised dish, we can take the receiver out of its box and fully program
it on one of our demonstration dishes. This would mean that the new programmed receiver can be
connected up by the customer and all the satellites channels will work straight away.
(Providing it is connected to a dish that is properly fitted, set up, and tracking the arc)
It would take a customer about many hours to program a receiver (since there would be
unfamiliarity with the installation menu system). After programming, the channels are then organised
in a logical order. (This is what takes the most time.) We make sure the first channel on every
satellite is a clear free to air unscrambled channel. Channels are organised into a logical order.
e.g. Adult channels all together etc. Movie packages .. etc. Moving all of the channels into a
logical order can take days. This programming is ONLY £19.95 This service is entirely optional
but for mail order customers it can take a great deal of the worry and uncertainty out of a
purchase. The programmed receiver is supplied without dish positions to be used with any dish.
Only the positions and the limits need to be added. This is a 10 minute job. This option is
ideal if you are buying a full motorised system and you intend to fit it yourself.
This option helps a great deal. It also makes it easier to install a motorised dish as channels
already loaded can help identify the satellite if a budget satellite meter is being used. Detailed
installation notes written by us are included and we can talk you through the installation
over the phone if required. See our support package on our support page.
Our notes guide you through how to connect a programmed receiver, and setting the positions.
In addition, useful easy to follow notes on blind searching written by us are included for
future reference. For international orders, this option has one other worthwhile purpose.
The receiver is fully tested before shipping while it is being programmed.
Motorised receiver full programming option
Order code MOTPROG
Add only £19.95


LNB Upgrades.

These options are for standard dishes (including clear dishes) not Sky mini dishes.

Change the single LNB to a different make

Titanium 0.1dB LNB quad boxed Technomate 0.1dB LNB quad boxed

(Please note that we can't put a zero into the shopping cart so the option is charged at 1p)
This is a system option where we take out one LNB and substitute in a different one.
If you want to buy this LNB but you are not buying a system as well, DO NOT add to cart.
The LNB must be bought from the LNB page at the correct price. These are system options.

Change my LNB from the one quoted in my system to an Titanium single LNB
Order code OPTTIRM
£00.01
Change my LNB from the one quoted in my system to a Technomate LNB
Order code OPTCHTE
£00.01


Upgrade a single LNB to 0.1dB twin LNB

Titanium boxed Technomate boxed

Titanium or Technomate - ultimate performance LNBs.
(e.g. Sky Digibox or freesat option.)
For use with multiple receivers on one fixed dish
Also for a multibracket option
If the twin LNB option is to be used with the 3 or 4 multibracket LNB dish kits,
(e.g. Sky Plus or freesat twin tuner option.)
If you want to run a Sky Plus / HD or a Freesat receiver using the one dish fitted
with a Triax multibracket kit you need to add this option. The normal receiver will pick up the
signal from the Astra 1 and Hotbird LNB and one output from the twin (4 output) LNB. This will all go
through the switch down one cable to the receiver. The second output of the twin LNB
can go down a second cable to the Sky or Freesat box. The two receiver can then be watched on
(e.g.) AV 1 and AV 2 (or e.g. channel 7 and 8) on the TV. This puts both systems onto
one dish.

System option - Include a Technomate 0.1dB LNB twin output LNB
instead of the LNB with my system.

Order code OPT0TTW
Add only £10.00
System option - Include a Titanium 0.1dB LNB twin output LNB
instead of the LNB with my system.

Order code OPT05TW
Add only £10.00


Upgrade a single LNB to a QUAD 0.1dB LNB

Titanium boxed Technomate 0.1dB LNB quad boxed

Titanium or Technomate - ultimate performance LNBs.
(e.g. Sky Plus / HD or freesat HDR twin tuner option.)
For use with multiple receivers on one fixed dish
Also for a Traix multibracket option
If the quad LNB option is to be used with the 3 or 4 multiconnect LNB dish kits and
you want to run a Sky Plus / HD or a Freesat receiver using the one dish fitted
with a Triax multibracket kit you need to add this option. The normal receiver will pick up
the signal from the Astra 1 and Hotbird LNB and one output from the quad (4 output) LNB. This will
all go through the switch down one cable to the receiver. The third and third outputs of the quad LNB
can go down two more cables to the Sky or Freesat box. The two receiver can then be watched on
(e.g.) AV 1 and AV 2 (or e.g. channel 7 and 8) on the TV. This puts both systems onto
one dish.

System option - Include a Titanium 0.1dB quad LNB
instead of the LNB with my system.

Order code OPT02QU
Add only £28.00
System option - Include a Technomate 0.1dB quad LNB
instead of the LNB with my system.

Order code OPTT2QU
Add only £28.00


Upgrade a single LNB to a QUATRO LNB

Titanium 0.1dB LNB quatro boxed

These are the new Titanium third edition 0.1dB LNBs that are widely praised on many web sites.
The third edition has the gold connections and is very low noise. An ultimate performance LNB.
Dish kit option. - Include a Titanium 0.1dB Quatro LNB instead of the single LNB with my system.
Quatro LNBs are used to provide satellite signals to multiswitches
System option - Include a Titanium quatro LNB instead of the single LNB with my dish or system.

System option - Include a Titanium 0.1dB quatro LNB
instead of the LNB with my system.

Order code OPT01QT
Add only £28.00



Upgrade a single LNB to a Octo Technomate 0.1dB LNB

Technomate 0.1dB 8 output LNB

High sensitivity range. For use with multiple receivers on one fixed dish. Also for a multibracket option
If the Octo LNB option is to be used with the 2 sat Triax multibracket LNB dish kit and
you want to run several receivers including a Sky Plus / HD or a Freesat receiver using the one
dish fitted with a Triax multibracket kit you need to add this option. The normal receiver will pick
up the signal from the Astra 1 and Hotbird LNB and one output from the Octo (8 output) LNB. This will
all go through the switch down one cable to the receiver. Other outputs of the Octo LNB
can go down more cables to the extar Sky or Freesat receivers. This puts many systems onto one dish.

System option - Include a Technomate 0.1dB Octo LNB
instead of the LNB with my system.

Order code OPT02OC
Add only £53.00



Long pole "above the gutter" wall
mounts for fixed dishes up to 1.0m


Long pole wall mount 1 Long pole wall mount 2 85cm Clear dish

5 bolt fixing. Various stand off distances and 2 pole lengths - 1m and 2m. All pole diameters are 50mm
The poles are galvanised. the stand off distance is from the wall is to the inside of the pole.
If the dish is larger than 1.0m use a heavy duty "above the gutter" wall mount from our
wall mounts & ground stands page or a ground stand if applicable.
The following mounts are available from the Wall mounts & ground stands page,

Long pole wall mount 1. Stand off - 300mm. 2m galvanised pole.
Order code LPMOUN1

Long pole wall mount 2. Stand off - 500mm. 2m galvanised pole.
Order code LPMOUN2

Long pole wall mount 3. Stand off - 300mm. 1m galvanised pole.
Order code LPMOUN3

Long pole wall mount 4. Stand off - 500mm. 1m galvanised pole.
Order code LPMOUN4



(All prices on this web site include VAT.)

Links to menu pages,

Catalogue Contents Page. A summary of all pages. More products.
ADVICE Pages. Frequently Asked Questions. (FAQs) Read and learn!

Menu pages.

Satellite receivers menu page.
Fixed satellite dishes menu page.
Motorised satellite dishes menu page.
2, 3 or 4 satellite on a fixed dish menu page.
Clear transparent dishes menu page.
Motorised satellite systems menu page.
V Box menu page.
Satellite dish motors menu page.
Satellite systems menu page.
Caravan / Motorhome / RV Satellite menu page.

Ku, Ka, Universal and programmable LNBs menu page.
feedhorns menu page.
C Band LNBs and feedhorns menu page.

Vu+ receivers menu page.
Freesat receivers menu page.
Humax receivers menu page.
Sky receivers menu page.
Sky accessories menu page.
Technomate receivers menu page.
French TV and Italian TV receivers menu page.
Edision receivers menu page.
Technisat receivers menu page.
Sab receivers menu page.
Twin tuner receivers menu page.
High definition receivers menu page.
Linux receivers menu page.

Multiswitches menu page.

Satellite finder meters menu page.
Wall mounts and ground stands menu page.
Installation equipment menu page.
Cable menu page.
Diseqc switches and motors menu page.

Optical LNBs and equipment menu page.
Satellite accessories menu page.
TV, FM and DAB aerials menu page.
cams menu page.
adult cards menu page.
Index of all products menu page.



See our other web site at- www.primesat.eu

This site includes many products that are exclusive to the Satellite Superstore.
The site contains -
• Products that we manufacture (e.g. We have manufactured heavy duty wall mounts and ground stands since 1991).
• Selected products which have our own Primesat brand name and have been prepared to our specifications.
• Selected products where we have been appointed the authorised UK or European distributor by the manufacturer.
www.primesat.eu is an information site. Here you will find full specifications and many detailed pictures.
To buy any of these products, simply order them on this web site.



Link to our own satellite museum site

Satellite Museum. A museum of vintage satellite receivers.
See
www.satellitemuseum.com

Satcom 7700 satellite receiver.

For old satellite receivers with knobs on and read about "A History Of Satellite TV".

Also see www.rewindmuseum.com. A Museum of vintage consumer electronics.
Vintage reel to reel video recorders. Vintage VHS and Betamax VCRs. Vintage video cameras. Vintage
Laser Disc. Vintage Computers. Old telephones. Old brick mobile phones. Vintage Hi Fi, Old reel
to reel audio and early audio cassette decks. Including, the history time line of vintage
consumer electronics ... and much more .....

Sony 2400 portable reel to reel video

It is well worth a visit.
Only The Satellite Superstore brings you
great products, advice and it's own museum.


Rewind Museum



You may be interested in two other web sites.

Hard tonneau cover for the 1947-53 Chevy truck. Hard tonneau cover for the 1947-53 Chevy truck.

www.1952chevytruck.com
This web site shows all of the restoration process and the modifications to this truck.
In addition, there is a hard high quality tonneau cover on a new web site
at www.classictonneaucover.com for the 1947-53 Chevy truck.


www.classictonneaucover.com



Contacting us.
Unlike many other companies we are happy to answer questions on the phone.
Tel. (UK) 01207 544664 and 01207 544224
International Tel. + 44 1207 544664.
Before sending questions via e-mail please check-out our Frequently Asked Questions as this could save time.
If you have any questions & comments regarding this site's content, or you need advice please ....
click here to go to our contact forms.



Copyright © 2019 Vision International. All rights reserved.